The 1 PC Ball Valve from VTY is a manual valve. The structural design is integral, and the ball is stabilized by a plug, so that it is convenient for maintenance, and the diameter of the ball valve is also small. The ball is inserted from the side of the valve body. After the valve seat has to be screwed in, press the ball again.
Some non-standard 1 PC Ball Valves have a short structure, so the best way to distinguish is the structure of the valve body. These ball valves from VTY are fixed by a plug head, which are convenient and practical for maintenance, and are often used for small-sized valves.
1.Integrated body design eliminates potential leakage paths, enhances structural integrity, and simplifies maintenance.
2.Full bore or reduced bore options minimize pressure loss or optimize flow control.
3.Outstanding corrosion resistance ensures longevity in water, oil, gas, chemicals, and high-purity applications.
4.High-quality PTFE seals ensure tight closure, low-torque operation, and wide temperature compatibility
| Item | Specification |
|---|---|
| Standard | DIN, 3A, SMS, RJT, ISO, IDF, DS, Macon |
| Size Range | 1’’ – 6’’ / DN10 – DN200 / 17.2 – 168.3 mm |
| Material Grade | 304, 304L, 316, 316L Stainless Steel |
| Seal Material | EPDM, PTFE |
| Surface Roughness | Ra ≤ 1.6 µm (Standard) |
| Ra ≤ 0.8 µm (Fine Polished) | |
| Ra ≤ 0.4 µm (Mirror Polished / High Sanitary Grade) |
1.Industrial: Oil and gas pipelines, chemical processing, power generation, HVAC systems
2.Water treatment: Drinking water, wastewater, ship systems
3.General-purpose: Water supply, drainage, irrigation, compressed air systems
1.Due to its simplicity, a one-piece ball valve is relatively cheaper compared to other ball valves.
2.It offers little fluid resistance and no friction on the switch.
3.The one-piece valve is also light and occupies less space.
4.A one-piece ball valve can be easily turned on and off.
Address
No.729, Road 3, Binhai Industrial Zone, Wenzhou, Zhejiang, China
Tel
